Cofe
It is possible to print without material system by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA Elegoo + Black Transmission Distance: 0.3
PLA Bambulab Basic Brown Transmission Distance: 2
PLA Sunlu META Grey Transmission Distance: 3
PLA Elegoo+ White Transmission Distance 6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Brown
At layer #14 (1.2mm) swap to Grey
At layer #15 (1.28mm) swap to White for the rest.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
