Compsognathus - Jurassic Park (Hueforge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA PolyTerra Charcoal Black Transmission Distance: 0.3

PLA BambuLab Basic BambuLab Green Transmission Distance: 8

PLA BambuLab Matte Lemon Yellow Transmission Distance: 4

Swap Instructions:

Start with Charcoal Black

At layer #9 (0.8mm) swap to BambuLab Green

At layer #13 (1.12mm) swap to Lemon Yellow for the rest.