0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2026-09-02 00:49:12
240
7
Report

Creality Hi - Extruder Cable Management (No-Sag) 0.2mm layer

@LMaker_552629
Message
Follow
Description

Improve the performance and aesthetics of your Creality Hi with this simple cable management solution. This mod prevents the main toolhead cable from sagging or drooping, ensuring smooth movements and preventing potential interference during printing.


It uses a PTFE tube as a flexible "spine" to maintain a perfect arch and provide structural support to the cable.

 

2026-02-01 12.19.35.webp


Required Materials:


  • PTFE Tube: 1x 46cm length
  • 1 units – Self-Locking Cable Ties 2,5x100 



Step-by-step Process:


1. Base Assembly: Connect the base to the support arm


2026-02-01 11.57.21.jpg


2026-02-01 11.57.42.jpg



2. PTFE Placement: Place the PTFE tube onto the support arm guide.


 

2026-02-01 12.01.18.webp


 

3. Positioning: Place the entire assembly onto the Creality Hi main cable.


 

2026-02-01 12.07.25.jpg


2026-02-01 12.07.39.jpg


 

 

4. Securing the Base : Use a small cable tie to secure the base and trim the excess with pliers. 


 

2026-02-01 12.08.58.jpg


2026-02-01 12.09.31.jpg


2026-02-01 12.13.04.jpg

 

 

5. Clip Installation: Snap the 4 clips onto the PTFE tube.


 2026-02-01 12.17.15.jpg



6. Final Arching: Fasten the clips onto the extruder wiring, shaping it into an arch. 


 

2026-02-01 12.18.26.jpg


 

7. Ready!: Enjoy your upgraded Creality Hi. 

Tags
creality
crealityhi
creality hi
ptfe
wire
wiremanagement
cable management
sag
no sag
ptfe tube
hi
upgrade
mod
creality mod
cable clip
wire guide
cable holder
License