Customazible Graphic Bookends/Book Nooks
Hello everyone. If you're a reader you know how satisfying is to have all your books tidy on their shelfes. My latest creation can help you with that! Here enter my HueForge bookends/book nook with interchangeable spines created with HueForge. You can find all the STLs and print profiles - and they are a toon so if you appreciate it leave a like 😊 - for the Kobra 3 uploaded. Here are the HueForge instructions:
Project: classic.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 39.5x196.79mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.7mm and the Actual Depth is 1.7mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA ERYONE Red Matte Transmission Distance: 5
PLA Artillery Yellow Transmission Distance: 9
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red Matte
At layer #11 (0.96mm) swap to Yellow
At layer #16 (1.36mm) swap to White for the rest.
-----------------------------------------------------------------------------------------------------------------------
Project: economics.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 39.5x196.79mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.7mm and the Actual Depth is 1.7mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA GratKit Green Transmission Distance: 10
PLA+ Sunlu Silver Transmission Distance: 2
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Green
At layer #13 (1.12mm) swap to Silver
At layer #16 (1.36mm) swap to White for the rest.
--------------------------------------------------------------------------------------------------------------
Project: fantasy.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 39.5x196.79mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.7mm and the Actual Depth is 1.7mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA PRINSFIL Navy Blue Transmission Distance: 2
PLA+ Sunlu Blue Transmission Distance: 4
PLA ANYCUBIC Turquoise Transmission Distance: 12
PLA+ Sunlu White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Navy Blue
At layer #8 (0.72mm) swap to Blue
At layer #10 (0.88mm) swap to Turquoise
At layer #11 (0.96mm) swap to White for the rest.
------------------------------------------------------------------------------------------------------
Project: horror.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 39.5x196.79mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.7mm and the Actual Depth is 1.7mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA ERYONE Red Matte Transmission Distance: 5
PLA+ Sunlu Silver Transmission Distance: 2
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red Matte
At layer #11 (0.96mm) swap to Silver
At layer #16 (1.36mm) swap to White for the rest.
-----------------------------------------------------------------------------------------------
Project: mistery.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 39.5x196.79mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.7mm and the Actual Depth is 1.7mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Gold Transmission Distance: 5
PLA+ Sunlu Silver Transmission Distance: 2
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gold
At layer #13 (1.12mm) swap to Silver
At layer #15 (1.28mm) swap to White for the rest.
-------------------------------------------------------------------------------------------
Project: poetry 2.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 39.6x197.29mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.7mm and the Actual Depth is 1.7mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA PRINSFIL Navy Blue Transmission Distance: 2
PLA ANYCUBIC Turquoise Transmission Distance: 12
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Navy Blue
At layer #8 (0.72mm) swap to Turquoise
At layer #13 (1.12mm) swap to White for the rest.
----------------------------------------------------------------------------------
Project: scifi 3.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 39.6x197.29mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.7mm and the Actual Depth is 1.7mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA PRINSFIL Navy Blue Transmission Distance: 2
PLA+ Sunlu Blue Transmission Distance: 4
PLA ANYCUBIC Violet Transmission Distance: 9
PLA+ Esun Magenta Transmission Distance: 4.5
PLA+ Sunlu White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Navy Blue
At layer #8 (0.72mm) swap to Blue
At layer #10 (0.88mm) swap to Violet
At layer #11 (0.96mm) swap to Magenta
At layer #12 (1.04mm) swap to White for the rest.
----------------------------------------------------------------------------------
Project: science.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 39.5x196.79mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.7mm and the Actual Depth is 1.7mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA GratKit Green Transmission Distance: 10
PLA+ Sunlu White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Green
At layer #12 (1.04mm) swap to White for the rest.
------------------------------------------------------------------------
You can find more information about these models on my post: https://forum.makeronline.com/topic/If%20you%20love%20reading%20you%20cant%20miss%20these%20-1460.html
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
