Da Da Dan Momo HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

DESCRIPTION

The Model is 140x140mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.6

PLA+ Sunlu Fuschia Transmission Distance: 5

PLA+ Sunlu Skin Transmission Distance: 5

PLA+ Sunlu White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #9 (0.8mm) swap to Fuschia

At layer #13 (1.12mm) swap to Skin

At layer #20 (1.68mm) swap to White for the rest.