Darth Vader Holding Photo Frame of Vaders

Darth Vader Holding Photo Frame of Vaders Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 177.35x179mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.7mm and the Actual Depth is 2.6mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.6

PLA+ Sunlu Grey Transmission Distance: 2

PLA BambuLab Basic Silver Transmission Distance: 0.5

PLA+ Sunlu White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #9 (0.88mm) swap to Grey

At layer #18 (1.6mm) swap to Silver

At layer #26 (2.24mm) swap to White for the rest.

Grab my newest file releases FREE before they get released on other platforms by clicking here: https://makerworld.com/en/@zigzag