Deadpool & Wolverine hueforge 200x200

Project: dead pool.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

PLA smartfil black Transmission Distance: 0.4

PLA BambuLab Basic Blue Gray Transmission Distance: 3

PLA smartfil gris Transmission Distance: 0.8

PLA smatfil White Transmission Distance: 6

This print uses 4 unique filaments

Swap Instructions:

Start with black

At layer #11 (0.96mm) swap to Blue Gray

At layer #14 (1.2mm) swap to gris

At layer #18 (1.52mm) swap to White for the rest.