Death's Head Moth Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 200x200mm in size. Also added a 150x150 size.

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used

PLA+ Sunlu Black Transmission Distance 0.6

PLA+ Sunlu Grey Transmission Distance 2

PLA+ Sunlu Silver Transmission Distance 2

PLA+ Sunlu White Transmission Distance 5

This print uses 4 unique filaments

Swap Instructions

Start with Black

At layer #8 (0.72mm) swap to Grey

At layer #15 (1.28mm) swap to Silver

At layer #19 (1.6mm) swap to White for the rest.