2026-09-24 15:46:57
471
43
Dice Tower Skull Castle
@KraftyGeckoShop_848401
Donate
Message
Follow
Recommended printing method
Add
0.20mm Standard – 5% Infill – 0.4mm Nozzle
Kobra X
Kobra 3
、
Kobra S1
、
Kobra 4
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Plus
/ Plates:1
/ 15h16m
7
Share
Description
Skull Castle Dice Tower with an internal spiral slide and integrated front dice tray.
Drop the dice into the top of the tower, and they roll down the spiral chute before exiting through the skull into the tray.
The current print profile uses 5% infill and requires approximately 440 g of filament. The infill can be reduced further to save some material, but I found that the model starts to feel a little less sturdy, so 5% is my recommended setting.
The model can also be printed in multiple colors. I’ll upload a multicolor print profile soon, using at least 3 colors.
If you print it, feel free to share your make!
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
