2025-01-03 04:54:27
1.2k
102
Dice case
@honor_4437507
Donate
Message
Follow
Recommended printing method
Add
rrr
Kobra 3
Kobra S1 Max
、
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 16m
25
Share
Description
Had a 6 small dices laying freely around so I made a small box to store them.
Print instructions
The 2 halves of case are identical, each have 2 magnets. I used 5x2,5mm magnets and the holes are just tight enough to press them in with plier, no glue necessary.
Size of dice - 10mm
Printed in PLA, 0,2mm layer height and 15% infill.
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
