Doctor Who Tom Baker Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 175.03x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

    PLA+ Sunlu Black Transmission Distance: 0.6

    PLA+ Sunlu Grey Transmission Distance: 2

    PLA+ Sunlu Silver Transmission Distance: 2

    PLA+ Sunlu White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

    Start with Black

    At layer #9 (0.8mm) swap to Grey

    At layer #14 (1.2mm) swap to Silver

    At layer #19 (1.6mm) swap to White for the rest.

I added a smaller 131x150 file also.