2026-06-18 07:16:46
272
12
Dog Eared Multimeter Probe Tweezers
@laduerksen_5765615
Donate
Message
Follow
Recommended printing method
Add
Dog Eared Multimeter Probe Tweezers
Kobra X
Kobra 3
、
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:4
/ 2h40m
1
Share
Description
The unique dog-eared tabs on the back allow for expanding the reach of the probes.
The dual 10-degree angles on the holders allow for bell touch and makes positioning your lead easy.
3D printing settings
These are best printed in regular PETG. "Rapid PETG" or other variants may be too flexible.
Hotend 240°
Bed 75°
100% infill.
In your slicer:
8mm leads scale to 100%
9mm leads scale to 112.5%
9.5mm leads scale to 118.25%
10mm leads scale to 125%
All 4 sizes are included in the print profile. Just measure the diameter of your lead and print the size that will be snug. I have not seen leads over 10mm yet but, just scale using the ratio between you diameter and the 8mm leads.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
