DoorSide – Reversible Over-Door Clothes Hanger Rack
1
Create extra space for clothes on hangers with this one-piece over-door rack. Six circular openings keep individual hangers separated, while the open triangular frame supports the projecting arm with less material. The reversible design can be used on either side of a suitable door.
Print the single part, remove any brim and place the top hook over the door edge as shown in the photographs. No screws or assembly hardware are required. Measure your door thickness and check the clearance above it before printing. Check that the rack fits securely and the door can move freely.
Suggested FDM starting settings: 0.4 mm nozzle, PLA, 0.20 mm layers, 2 walls and 15% gyroid infill. Supports are not required in the supplied orientation; use a brim if needed. Adjust the settings for your printer and filament.
Allow the print to cool and inspect the hook and hanger openings before use. Load gradually; no rated load capacity has been established.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
