Dowelling jig for flat boards

A 6mm dowelling jig for drilling holes on the face of a board. (like dowel holes for walls on a cabinet). It's made with the 32mm European furniture standard. There is an extended bar for making repeatable holes from a side.

BESIDES FILAMENT YOU WILL NEED:

• Use a piece of rubbermat underneath the base to make it grippier.
• Use 8mm aluminum rods in the holes of the base, and drill them out to be 6mm.
• M6 nut, bolt and spacer

I made an entire build in wall cabinet with my dowelling jigs.