0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2026-11-06 04:29:12
146
5
Report

Dragon's Siege: Backflow Incense Burner Diorama

@IlkekkoLab_4847706
Message
Follow
Description

The spire has fallen. The city is next.

Nobody on the walls saw it coming. One moment the great cathedral stood watch over the rooftops. The next, a dragon had its claws in the stone, the spire snapped like dry bone, and its tip came down straight through the roof of a house.

That is the moment you are about to print. Then you set it on fire.

Light a single cone on the broken spire. The smoke sinks through the stone, runs down inside the dragon's neck and spills from its jaws, slow and heavy, toward the doomed city below.

⚜ ⚜ ⚜

⚔ More than a burner

  • A whole city, not a statue. 33 printed parts: walls, towers, a gate, a town hall, an inn, a market, a well and streets of houses.
  • A scene with a story. The spire tip is buried in a roof, a chimney lies knocked down in the street, and rubble surrounds the cathedral.
  • A dragon that does the work. One cone and one hidden channel, with the smoke leaving through its mouth and nowhere else.

⚜ ⚜ ⚜

⚔ How the smoke travels

  1. The cone sits on a metal washer, on the flat top of the broken spire.
  2. The smoke drops into a hidden 5 mm channel that runs downhill inside the spire.
  3. A built-in sleeve carries it from the tower into the dragon's neck.
  4. It leaves through the throat and the open jaws.

No fans and no moving parts. Only gravity and a very angry dragon.

⚜ ⚜ ⚜

⚔ Print profile

One profile, four plates, ready to print. Everything is already arranged and pre-supported, with the settings that gave me the best result. Unless you really know what you are doing, I recommend leaving the other settings alone.

  • Tested on: Bambu Lab P2S
  • Printed in: PLA
  • Recommended material: PETG, which handles heat better
  • Filament: about 613 g (480 g model + 133 g supports)
  • Print time: about 34 hours (3h 52m, 17h 11m, 7h 32m and 5h 37m)
  • Bed size: 256 × 256 mm, because the base alone is 253 × 245 mm

⚜ ⚜ ⚜

⚔ What you get

  • Dragon and cathedral, printed as one piece, so there is no joint to seal along the smoke channel
  • City base with 78 built-in pins
  • 31 separate city parts
  • Illustrated assembly guide in gothic style (PDF, English and Italian), with a numbered map of the city

⚜ ⚜ ⚜

⚔ Assembly

Numbers are engraved under most parts and in the matching spot on the base. The few without a number are on the map in the guide.

The order matters, or the parts will not fit:

  1. Dragon and cathedral
  2. The numbered buildings
  3. The two shop houses
  4. The round towers
  5. The square towers
  6. The walls and the gate, last of all

The two shop houses, the market, the cart and the fallen chimney have no pins, so glue them in their seats. Finished size: about 253 × 245 mm, 245 mm tall.

⚜ ⚜ ⚜

⚔ You also need

  • Backflow incense cones
  • 1 M5 metal washer: the cone must never touch the plastic
  • Super glue

⚜ ⚜ ⚜

⚔ For a good river of smoke

  • Keep it away from drafts, fans and open windows.
  • Center the cone over the hole.
  • If the flow gets weak, clean the channel: incense resin slowly builds up inside.

Safety: never leave burning incense unattended. Use it on a heat-resistant surface, away from children, pets and anything flammable.

⚜ ⚜ ⚜

Follow @IlKekkoLab for more designs.

May your walls hold longer than these did.


Tags
backflow
backflow incense
backflow incense bur
incense burner
incense holder
incense
dragon
dragon incense
gothic
cathedral
medieval
medieval city
castle walls
diorama
fantasy
smoke waterfall
cone incense
gothic decor
home decor
modular
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Documentation
PDF
Dragon's Siege - Assembly Guide.pdf
18.58MB
PDF
Dragon's Siege - Istruzioni di montaggio.pdf
18.55MB