Dragon Ball Tribute

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 169x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 3mm and the Actual Depth is 1.9mm

Filaments Used:

    PLA JAYO Black Transmission Distance: 0.3

    PLA SMARTMATERIALS RECICLED Orange Transmission Distance: 7

    PLA SMARTMATERIALS RECICLED Yellow Transmission Distance: 6

This print uses 3 unique filaments

Swap Instructions:

    Start with Black

    At layer #8 (0.72mm) swap to Orange

    At layer #14 (1.2mm) swap to Yellow for the rest.