2026-09-19 23:46:09
526
54
Dragon
@pozsar_4308928
Donate
Message
Follow
Recommended printing method
Add
0.2mm layer, 2 walls, 8% infill
Kobra S1
Kobra 3
、
Kobra 2
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 3h8m
9
Share
Description
Printing:
Use my shared, pre-configured 3MF print files or do the following setup:
- 0.40mm nozzle
- 0.20mm standard profile
- 8% gyroid infill
- outer brim
- support type: organic (manual paint)
- under the belly with 30° angle limit
- under the head 40° angle limit
Commercial License:
You can subscribe for a commercial license membership on my Patreon.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
