EDF Mod for the Gasb3

I updated the nacelle they are labeled as front, rear, mirrored nacellel, and will need (2) tip up files. These brought the edfs forwards enough where I could use a 2200 4s and have it balance well. Can see it fly here( https://www.youtube.com/watch?v=TPw8wn3mSPg ) although I had throws too aggressive on all 3 planes, but still shows it will fly with the nacelles and plenty of power.The edf version starts at 47 seconds I used the Gasb_three and modded it to use (2) 50mm 11 blade edfs from powerfun edf. The verticals now have the edf housing in it and the tail of the fuse is actually bored out to accept a model rocket motor. I have not flown it yet but will add video once I do. This is only the modded parts, you will have to download Carletto73 original file found here: https://www.thingiverse.com/thing:3605665 then print these mods to replace some stock pieces. Hope you guys like it. You will need a small spring to preload the new canopy latch. As far as what other materials, just follow Carletto73's instruction booklet. I did label the modded parts with the colors I used for the blue angels scheme in the pictures. I printed these as 3 top layers 3 bottom layer and 1 perimeter. Heres a link to the filament: https://coexllc.com/product/3d-filaments/pla-filament/pla/navy-blue-pla-1-75mm/