Eiffel tower Hueforge

Eiffel tower Hueforge

No AMS Needed, Just manually switch the filament. I used what I have on hand.

Don't forget the frame

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:PETG JAYO Black Transmission Distance: 0.3PLA BambuLab Basic Blue Transmission Distance: 4PLA+ IIID Max Fuchsia Transmission Distance: 8PLA+ IIID Max Pink Transmission Distance: 5PETG JAYO White Transmission Distance: 6

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to BlueAt layer #12 (1.04mm) swap to FuchsiaAt layer #17 (1.44mm) swap to PinkAt layer #19 (1.6mm) swap to White for the rest.

Please "Like", review, follow and upload make.

Commercial license

As of 2/25/24 my designs are no longer allowed to be sold commercially.

Do you want to sell prints of this model or any of my models? You can purchase commercial licensing at Patreon or Buy Me A Coffee. Earring Commercial License is just $3 a month. A full commercial license for all of my designs is just $7 a month.