2024-08-13 01:04:36
2.8k
267
Elden Ring GPU holder
@Cstibikeee_3453412
Donate
Message
Follow
Recommended printing method
Add
Elden Ring GPU holder
Kobra S1
Kobra 3
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
/ Plates:1
/ 2h 16m 45s
67
Share
Description
- The model consists of 3 parts.
- The logo and the support column should be printed with a layer height of 0.2, the inner bar with 0.12, otherwise the thread will be too tight.
- Support is only needed for the logo, for the part where the two parts will be snapped together.
- I don't recommend fast print speeds because of thread and the holes.
- An 8x2 mm magnet can be placed in the bottom of the object.
- Height adjustable between 62 mm and 109 mm
- I uploaded two print profiles. One sliced in Anycubic slicer and the one sliced in Bambu Studio.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
