0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2024-08-29 17:48:36
279
8
Report

Electronic case V1.1 - Ender 3

@HribaDesign_2232091
Message
Follow
Recommended printing method
Description

The case allows easy access to the board and has space for cable management in the space behind the board.

  • Ready for SKR MINI E3 or similar board and Raspberry Pi ¾ or two StepDowns.
  • Optimized for 0.4 nozzle and for supportless printing.
  • Two positions for StepDowns have only one mounting hole each. Additional holes must be made according to the size of the component in the prepared posts.
  • It is possible to install fans of sizes 50/60/80/120 with a thickness of up to 25 mm from the inside of the door. Mounting holes are provided for fans.
  • For connecting the board and raspberry a bent usb cable is needed.
  • In the back space there are preparatory grooves for Velcro which can be used for tying cables.

Necessary fasteners

  • 4 pcs DIN912 M5x16 screws for completing the two basic parts of the case together.
  • 4-8 pcs DIN912 M5x16 screws for mounting on the printer profile.
  • 4-8 pcs M5 nuts for T-profile on the printer profile.
  • 3 pcs DIN912 M3x20 screws for hinges.
  • 4 pcs DIN912 M3x20 screws for cable glands.
  • 5 or more pcs DIN912 M3x6 screws for motherboard and other electronic parts.

P.S. the photos do not correspond 1:1 to the models. After printing, I still fine-tuned the models, but not so much that I needed to print them again :).

Tags
box
case
creality
electric
raspberrypi
raspberrypi4
stepdown
lm2596
raspberrypi3
motherboard
skr
motherboardcase
withoutsupport
skrminie3
lm2596module
lm2596mount
elektronic
License