Elsa Frozen Lightbox

✨ Want to sell my designs? Subscribe to my Patreon to get a commercial license.

☕ Or, if you'd like, buy me a coffee to support my projects!

Bring the magic of Arendelle to life with this Elsa Lightbox Lamp! ❄️✨

This model is designed as a clean, vibrant 3D lightbox that works as a nightlight or desk decoration. The multi-colored front panel highlights Elsa's iconic braid and blue dress, creating a stunning glow when illuminated from behind.

💡 Features:

• Easy Multi-Color Printing: Optimized for AMS / multi-material systems (no manual color swap needed if using AMS).
• Crisp Lines & High Contrast: Black outlines separate the colors cleanly, preventing light bleed between sections.
• Custom LED Lighting: Designed to fit standard 12V or 5V LED strips inside the housing.
• Great Nightlight: Soft ambient lighting, perfect for kids' rooms, gaming setups, or Disney fans.

🛠️ Print Settings & Recommendations (Impostazioni di Stampa)

• Nozzle Size: 0.4 mm (0.2 mm nozzle recommended for crisp outline details if scaling down)
• Layer Height: 0.2 mm (first layer 0.2 mm)
• Infill: 100% on the colored front plate / 15-20% Grid or Gyroid on the back housing frame
• Supports: Not needed / None
• Brim: Not necessary but Recommended for the outer frame to prevent corner warping
• Wall Loops: 3 walls for the frame shell

🔌 Assembly & Wiring Guide (Guida al Montaggio e Cablaggio)

1. Front Panel: Print face-down on a textured or smooth PEI sheet for the best surface finish.
2. Back Housing: Print in black or opaque filament to prevent light leaks on the sides.
3. LED Strip Installation: Cut a strip of LED (5V USB or 12V DC) to fit around the inner perimeter of the back box. Stick it firmly inside using the adhesive backing.
4. Soldering & Wiring: Pass the power cable/USB wire through the designated cable hole at the bottom/back. Solder the positive (+) and negative (-) wires directly to the LED strip contact pads (or use quick-connect clips if you prefer). Secure the cable inside with a zip tie or drop of hot glue as a strain relief.
5. Closing the Lightbox: Snap or glue the front panel onto the back housing frame.