FIFA World Cup Trophy cutted in 4 bodies for AMS

This is a remix of the wonderful model of CreativityFlux_3D which you can find on makeronline at this link.

No fundamental changes by me, but to have a better coating and colouring option of the green ribbons (I think in original they are from emerald), I've sliced the model into 4 bodies in Fusion 360. So I was able to use the green as a full body colour for the ribbons instead of only colouring it in the slicer.

I printed the model from the photo in a height of 25cm on my Anycubic Cobra X and used the Silk Gold PLA filament from Giantarm and Silk PLA Christmas Green from Anycubic. Result is really really pretty. The winner of our World Cup prediction game at work will be thrilled to receive the trophy!

As my first print got problems with the adhesion of some of the FIFA letters on the substrate underneath, I stopped the print and printed it with support a second time.

But even with supprt the 2 letters I & F did not adhere properly. I had to glue it afterwards.

Added now a new version with solved ashesion problem.

Anycubic slicer next (ASN) tells to use support because of floating regions, but my Kobra X did it even well without support.

If you want to be sure of a proper print, use supports.