0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2025-08-01 20:01:20
3.9k
416
Report

First Layer Full Test – Kobra 3 Max

@Fabio_2813241
Message
Follow
Recommended printing method
Description

🧼 Before running the first layer test, make sure to:


  • Enable bed preheating to your desired printing temperature
  • Clean the print bed with warm water and dish soap (avoid alcohol or harsh solvents)
  • Run bed leveling
  • Run flow calibration


Full-size first layer test for the Anycubic Kobra 3 Max, designed to cover the entire usable print area.

Optimized for both 0.4 mm and 0.8 mm nozzles – profiles are included.


⚙️ This test is the result of several iterations with customized filament and temperature settings (used PLA+).

💾 The .3mf file contains the tested print parameters – just print it as is.


✅ Use it to check:

• First layer adhesion across the full bed

• Z-axis consistency

• Precise bed leveling


📸 If you find it useful, please leave a like, drop a comment, and share a photo of your result!


🙏 Thanks for downloading

Tags
kobra3max
firsttest
bedtest
firstlayer
kobra3
testlayer
kobra3 max
leveling
testbed
layercheck
License