2024-12-27 21:58:30
257
14
Flaming Phoenix - Hueforge
@Ciapelo_2164365
Donate
Message
Follow
Recommended printing method
Add
Flaming Phoenix - Hueforge
Kobra 3
Kobra S1 Max
、
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 3h26m
4
Share
Description
Project: Fenice.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Esun Red Transmission Distance: 6
PLA+ Esun Yellow Transmission Distance: 6
PLA+ Sunlu Beige Transmission Distance: 7.6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #12 (1.04mm) swap to Yellow
At layer #18 (1.52mm) swap to Beige for the rest.
Tags
License
