Flappy Scotland Flag - Another floppy-like design
It's a floppy Scotland flag!
Printing Instructions:
- Layer height: 0.16mm
- Wall loops: 3
I've included a zip file with the model split up into different colors to make it easier to paint in the slicer. If you print them separately, you will not be able to glue them together (who would want to deal with that tedious mess, anyway?).
If you choose not to use the 3mf file, this is how you'd paint the model easily:
In Orca Slicer or Bambu Slicer (You can probably do this with other slicers, too, but I'm not familiar with them in order to give instruction), when importing, select White.stl, Blue.stl, and Bottom.stl then select "Open". The slicer will then ask "Load these files as a single object with multiple parts?" to which you will select "Yes".
At the left under the Process section, there's a toggle to change from Global to Objects. After you've toggled it to Objects you can now change the colors of each part in order to easily paint it.
Make sure you have your build plate nice and clean to avoid adhesion issues. Either clean it with an ammonia based cleaner like Windex or clean it with high quality dish soap and warm water. IPA also helps, but not guaranteed to work.
Thank you for your time and consideration on this matter.
Feel free to join my discord for additional support, questions, or suggestions!
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
