Flareon - Fire Eevee Evolution - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA Eryone Black Transmission Distance: 5

PLA Eryone Red Transmission Distance: 5

PLA Eryone Orange Transmission Distance: 5

PLA Eryone Yellow Transmission Distance: 5

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Red

At layer #14 (1.2mm) swap to Orange

At layer #17 (1.44mm) swap to Yellow for the rest.