Foghorn Leghorn - Onepiece

Foghorn Leghorn, a cartoon character in the Looney Tunes and Merrie Melodies series of short films by Warner Bros.

This is a onepiece version of Foghorn based on my multi-part Foghorn model that I've previously posted. 

Since I do not have an SLA printer, I teamed up with maker Kyler Stern to do the printing and painting.

I converted my multi-part model to a onepiece model for SLA and FDM printing. Kyler then proceeded as follows:

Decreased size from original to 3 Inches tall

Scale: X: 1.76, Y: 2.19, Z: 3.00 Inch = 59.63% of original size

Printer: Anycubic Photon M3

Resin: Anycubic Water-Wash Resin+ Grey

Layer Thickness: 0.05 mm

Hollowed body.

Print time: 5 hours

Note: Something important to call out regarding print time. Kyler has his screen power set to 80% power. This increases print time significantly but extends screen life. This might be important for individuals going forward.

***************

Other notes regarding the supplied STL file:

For FDM and SLA printing, size the STL file as needed for your purpose and add Slicer supports.

Enjoy!