2025-11-18 09:09:57
1.2k
78
Fujian Aircraft Carrier福建舰航母
@TianMenProgram_3678690
Donate
Message
Follow
Recommended printing method
Add
福建舰航母
Kobra S1
Kobra 3
、
Kobra 3 Max
、
Kobra 3 V2
、
Kobra X
/ Plates:1
/ 1h41m
29
Share
Description
Fujian Aircraft Carrier
Remember to clean the PEI build plate before printing to ensure good adhesion and that the filament is dry.
The model uses approximately 33g of material and has a print time of about 1 hour and 56 minutes.
Recommended settings: PLA, 0.12mm layer height, 2 wall loops, with all acceleration settings at 1000 or below.
打印前记得清洁好PEI打印板，保证其粘度OK，确保材料干燥
模型用料33克，时长1小时56分。
PLA，0.12层高，2层墙，加速度全部1000或以下。
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Comments & Ratings
Here is empty
Remixes
