Full Bed First Layer Test – Kobra S1 MAX

🧼 Before running the first layer test, make sure to:

• Enable bed preheating to your desired printing temperature
• Clean the print bed with warm water and dish soap (avoid alcohol or harsh solvents)
• Run bed leveling 
• Run flow calibration

First layer test originally designed for the Anycubic Kobra S1, but fully compatible with the Kobra 3 V2.

It covers the entire print bed, allowing you to check adhesion, flow, and leveling with precision.

https://www.makeronline.com/en/model/Full%20Bed%20First%20Layer%20Test%20%E2%80%93%20Kobra%20S1%20%2F%20Kobra%203%20V2/209848.html?trackModuleType=10

✅ I fine-tuned this file using specific print and filament settings to achieve excellent results.

It should be printed as-is, with no changes — the file includes all tested settings.

🖨️ Tested on:

• Anycubic Kobra S1 MAX

🙏 Huge thanks to everyone who downloads this model!

If it helps you, please leave a like, a comment, and share a photo of your test print — I’d love to see how it works on your machine!