Fully 3D-Printed Sim-Race Shifter

A completely 3D printed Sim-Race Shifter. You need micro switches and a USB Encoder to make it work. You should be able to load the .3mf file in your slicer just like .stl files. The spring should be printed with support. The Base & Balljoint must be be printed as 1 part. I am working on V2 with the PCB included and a cover so it's not that open. If you're interested in the V2 write a comment so i can upload it when it's done. If you have an idea for improvement please let me know.

I used this USB-Encoder:

https://www.berrybase.ch/zero-delay-arcade-usb-encoder-mit-kabelset?sPartner=g_shopping_ch&utm_source=google&utm_medium=cpc&gad_source=1&gclid=Cj0KCQjwj4K5BhDYARIsAD1Ly2p_QKUtv537v_pke0oAdGUGudQYSL7_bT557wZ4jPDGNij3oO8bem0aAu6xEALw_wcB

For the base i used PETG. The shaft should be as strong as possible, as it`s the weakest Link.

For ever other part i used PLA.

If you have Problems feel free to contact me.