2026-08-13 00:04:43
267
17
Glitch Benchy
@marcidy_5844985
Donate
Message
Follow
Recommended printing method
Add
Optimized - 0.2 layer, 15% infill, 2 walls
Kobra S1
Kobra 3
、
Kobra 2
、
Kobra 2 Plus
、
Kobra 2 Neo
、
Kobra 2 Pro
、
Kobra 2 Max
、
Kobra 3 Max
、
Kobra 3 V2
、
Kobra X
/ Plates:1
/ 1h23m
5
Share
Description
Printing tips:
- Use a 0.4mm or smaller nozzle
- Uncheck “Detect thin walls”
No support needed. (the slicer might give a warning for overhangs, but it prints without any problem).
I recommend printing it with dual/tricolor filaments.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
Comments & Ratings
Here is empty
Remixes
