Goku Hueforge

No ams needed just color swap, though AMS makes like easier.

I didn't use the exact colors, I used what I had on hand.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:PETG JAYO Black Transmission Distance: 0.3PLA PolyTerra Pastel Watermelon Transmission Distance: 1.5PLA BambuLab Matte Marine Blue Transmission Distance: 2PETG JAYO White Transmission Distance: 6

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:Start with BlackAt layer #9 (0.8mm) swap to Pastel WatermelonAt layer #14 (1.2mm) swap to Marine BlueAt layer #18 (1.52mm) swap to White for the rest.

Be sure to check out the frame for it.

Please "Like", review, follow and upload make.

Commercial license

As of 2/25/24 my designs are no longer allowed to be sold commercially.

Do you want to sell prints of this model or any of my models? You can purchase commercial licensing at Patreon or Buy Me A Coffee. Earring Commercial License is just $3 a month. A full commercial license for all of my designs is just $7 a month.