Golden Cat HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 112.66x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 3mm and the Actual Depth is 3.1mm

Filaments Used:

    PLA Generic White Transmission Distance: 5

    PLA Generic Black Transmission Distance: 0.3

    PLA Generic White Transmission Distance: 5

    PLA Geeetech Gold Transmission Distance: 3

    PLA Generic White Transmission Distance: 5

This print uses 3 unique filaments

Swap Instructions:

    Start with Jade White

    At layer #3 (0.32mm) swap to Black

    At layer #10 (0.88mm) swap to White

    At layer #13 (1.12mm) swap to Black

    At layer #18 (1.52mm) swap to White

    At layer #22 (1.84mm) swap to Gold

    At layer #24 (2mm) swap to Gold

    At layer #30 (2.48mm) swap to White for the rest.