Gridfinity Bins with label (several sizes)

Description

Update 25.04.2024

• added new half height bins on a 4x3 grid with several small and some not so small compartments.
• Ideal for small screws like M3 and below
• added as STL and print file

Update 19.04.2024

• Removing screw holes in the bottom of the bins for easier printing
• updating print profile

Gridfinity Bins in several sizes / Full height

I think Gridfinity speaks for itself. This is a remix of KptnAutismus.

I added a spot for sticking 6mm wide labels on it.

Gridfinity Bins in 4x3 grid / Half height

For really small parts (eg. M2 or M3 screws) even a 1x1 bin would be oversized.

So I designed a assortment box based on 4x3 grid with several tiny compartments. Some compartments are double in size, eg. for longer screws or a bunch of nuts.

Label

The Bins have 6mm wide label area, which is optimized for P-Touch 6mm labels

Modification

The original design has additional screw holes for M3 screws as alternative to the magnets. I can't think of any application where these screw holes might become useful. But they complicate printing, because for the need of supports.

So I decided to get rid of the screw holes and only keep the magnet holes. (In the downloads you still can find old STL-files with screw holes)

Printing

• PLA or PETG is fine
• Supports are only needed for the old version with screw holes in the bottom.
• The labels can be printed without support