Griffith Berserk - Hueforge

Thank for downloading!!!!

Donate Me (for free)

You can support me with a single click

Tutorial:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 95.59x170mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 1.5mm and the Actual Depth is 1.6mm

• Filaments Used:
• PLA Black
• PLA White
• Swap Instructions:
• Start with Black
• At layer #12 (1.04mm) swap to Jade White for the rest.
•