2024-12-29 06:18:50
265
9
Groot - Hueforge
@PokeGeorg_3090347
Donate
Message
Follow
Recommended printing method
+ Frequently Used Printer
6
Share
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 122.16x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.2mm
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA White Transmission Distance: 5
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to White for the rest.
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
