0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2025-05-03 15:13:16
741
27
Report

Ground Depth Probe

@Stanley_3783813
Message
Follow
Recommended printing method
Description

The Issue: Have you ever been on a long hike in a national park, only to step in a deep muddy puddle that ruins your day?

 

The solution created by me was a lightweight probe that can be prodded into the mud or sand until it reaches true ground, where you can determine the depth of how deep the obstacle is on a hiking trail to decide either to take a detour or face the obstacle head with assurances without risking getting soiled boots leading to faster wear and tear.

 

It can be washed or wiped quickly and is even more portable with the added ring, designed to hold a finger when the hand wraps around the textured handle, as well as being easily mounted into a keychain on your hiking bag, or pocket for your convivence. 

 

(maybe it is supposed to be a baton with increased infill as another use case?!)

Current Version: 1.1

The product is still in development with more features coming soon, although lacking on maker kits is a constraint from adding additional features to this tool; but not using those kits can mean additional resources and processing to assemble. 
 
CHANGELOG!: I have now included the additional variations of this product, which includes files for the probes with only one unit of measurement in addition to the original source file, exported from fusion360. You can tinker and remix and it would be really cool if you actually made attachments for it, just credit the original creator(myself) for the design and files provided.
 

 

Variation Description:

The product comes with both units of measurement; inches and centimetres and will later be updated to include more features

 

Embossed (ace): 

This variation comes with a choice to colour code each section which represents a centimetre in patterns but prints significantly slower due to purging. 

 

Engraved(no-ace): 

This variation prints significantly faster and can still be multicolour but will regardless lack colour alternations to measure centimetres by colour and also prints as a single object without any issues.

 

WARNING

1. Make sure the printer is well calibrated before for good accuracy; it will be needed for the small letters.

2. Using filaments such as PLA lack water resistance; instead use PETG when printing the model out. 

DISCLAIMER

1. The embossed variation when printing may leave small defects between each section of colour; consider increasing wall loops to ensure water resistance. It may also have surface issues on one side, which can be avoided by choosing the variations with the single measurements on the probe. 

(The amount of consumables for the probe itself is around 75 grams, or 100 grams with supports which are required to print and is considered lightweight.)

Tags
ground
probe
hiking
measuring device
ruler
centimetres
inch
License