0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2025-11-14 02:16:44
240
12
Report

Guinness HueForge

@fD667_1053716
Message
Follow
Recommended printing method
Description

Source art - Pinterest, Then used HueForge v0.9.3 to create the model.


Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.


The Model is 200x150mm in size. You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct.

You may print at higher layer heights below the Base Thickness of 0.48mm. The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.08mm.


It is possible to print without material system by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support.


Filaments Used:

PLA Anycubic Black Transmission Distance: 0.3

PLA Sunlu META Grey Transmission Distance: 3.6

PLA Elegoo + Orange Transmission Distance: 6

PLA Aurapol Beige Transmission Distance: 2.4

PLA Elegoo Basic White Transmission Distance: 7

This print uses 5 unique filaments



Swap Instructions:

Start with Black

At layer #10 (0.88mm) swap to Grey

At layer #13 (1.12mm) swap to Orange

At layer #14 (1.2mm) swap to Beige

At layer #16 (1.36mm) swap to White for the rest.

Tags
guinness
beer
dark
black
irish
hueforge
decoration
decor
3dart
3d
wallart
wallmount
home
homedcor
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.