HSW Voronoi bin / pen holder

Donate

Message

Recommended printing method

Print Profile Files (1)

Raw Model Files (4)

Add

Designer

/ Plates:2

/ 0m

Description

Easy and modern Voronoi bin for the HSW system by RostaP !

The inside diameter is 62mm. And the depth is 106mm

It can be printed without support.

You will need one of each piece to complete the assembly. Each part can be glued and the fit is not too tight so it is easy to get it right.

Be careful to correctly align both hexagon for pressing them is the HSW.

If other sizes are needed you can write me directly !