2025-01-09 19:17:34
885
37
Hirth Joints
@Rinkia87_5577449
Donate
Message
Follow
Recommended printing method
Add
0.2mm - 15% infill
Kobra 3
Kobra S1 Max
、
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 29m 12s
10
Share
Description
Hirth Joint parametric
i created this joint following a great tutorial from Kristian_Laholm on youtube. This type of joint can be used in so many different way, with just some simple modification.
Here you can see which parameters can be adjusted:
OD = Outer Diameter
ID = Internal Diameter
Grooves = number of grooves you can increase/decrease it
Angles = angle of the crease
Fillet = lower and upper fillet
If you have any question and if you need any suggestions for modifications please let me know.
Tags
License
