Homer Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 150.06x150.06mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:

PLA Generic Recicled Black Transmission Distance: 0.3

PLA Generic Recicled Jade White Transmission Distance: 5

PLA Generic Recicled Rosa Transmission Distance: 8

This print uses 3 unique filaments

Swap Instructions:

Start with Black

At layer #6 (0.56mm) swap to Jade White

At layer #13 (1.12mm) swap to Black

At layer #14 (1.2mm) swap to Rosa

At layer #21 (1.76mm) swap to Jade White for the rest.