Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3mm
Filaments Used:
PLA Jayo Black Transmission Distance: 0.6
PLA Geeetech Silk Gold Transmission Distance: 6
PLA Smartmaterials Recycled Yellow Traffic Transmission Distance: 2
PLA Smartmaterials Recycled White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Gold
At layer #25 (2.08mm) swap to Yellow
At layer #32 (2.64mm) swap to Jade White for the rest.
Tags
License

