2024-10-31 18:40:56
328
9
House Stark logo hueforge
@salv0111_5797585
Donate
Message
Follow
Recommended printing method
Add
NO ACE
Kobra 3
Kobra 2
、
Kobra S1
、
Kobra 2 Plus
、
Kobra 2 Neo
、
Kobra 2 Pro
、
Kobra 2 Max
、
Kobra 3 Max
、
Kobra 3 V2
、
Kobra X
/ Plates:1
/ 1h52m
ACE
Kobra 3
Kobra 2
、
Kobra S1
、
Kobra 2 Plus
、
Kobra 2 Neo
、
Kobra 2 Pro
、
Kobra 2 Max
、
Kobra 3 Max
、
Kobra 3 V2
、
Kobra X
/ Plates:1
/ 1h55m
1
Share
Description
Created with Hueforge and using only 3 colors. For all GOT fans and House Stark. Winter is coming!
The Model is 179x179mm in size. However, you can adjust the size (as long as it remains square to ensure the image stays unchanged).
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #20 (1.68mm) swap to Jade White for the rest.
Tags
License
Comments & Ratings
Here is empty
Remixes
