2026-02-02 09:59:53
2.5k
119
Hub fix for Kobra 3 Max.
@3DPrinter_5446284
Donate
Message
Follow
Recommended printing method
Add
Kobra3Max Hub Fix
Kobra 3
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 27m
25
Share
Description
This model changes the hub install on the Kobra 3 MAX printer.
Removing the screws from the hub is done from the back which causes problems when trying to do that with the printer paused to the right.
This model uses the existing screws to attach the model.
Then 2 new screws attach the hub from the front.
These screws go into heat inserts and are not subject to being stripped out.
This model can attach any of my other 1,4,5,8 or 9 port hubs although a stock hub will work too.
Two M3 x 14 screws are used to connect the hub securely.
M3x14 screw can be found here.
Affiliate Link: https://amzn.to/3NRKYOz
Heat Set Inserts can be found here.
Affiliate Link: https://amzn.to/4bweGm2
Tags
License
Standard Digital File License
This work is licensed under the Standard Digital File License.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
You are prohibited from sharing, sub-licensing, selling, renting, hosting, transferring, or distributing the digital file or 3D printed versions of this object, as well as any other derivative work in either digital or physical form (including remixes).You are not allowed to use the objects in any manner that involves charging money or collecting fees without permission.
