HueForge Goku SSJ

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 107.99x215.6mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.2mm and the Actual Depth is 1.9mm

Filaments Used:

PLA PolyLite Black Transmission Distance: 0.3

PLA BambuLab Basic Blue Transmission Distance: 4

PLA BambuLab Basic Orange Transmission Distance: 5

PLA PolyLite White Transmission Distance: 5

PLA BambuLab Basic Yellow Transmission Distance: 6

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Blue

At layer #9 (0.8mm) swap to Orange

At layer #18 (1.52mm) swap to White

At layer #21 (1.76mm) swap to Yellow for the rest.