Hueforge El castigador

Project: El castigador.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 125x251.18mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 3mm and the Actual Depth is 2.4mm

Filaments Used:

PETG JAYO Black Transmission Distance: 0.3

PLA BambuLab Basic Blue Gray Transmission Distance: 3

PLA BambuLab Basic Pink Transmission Distance: 8

PETG JAYO White Transmission Distance: 6

This print uses 4 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:

Start with Black

At layer #7 (0.64mm) swap to Blue Gray

At layer #10 (0.88mm) swap to Pink

At layer #19 (1.6mm) swap to White for the rest.