0
0
:
0
0
:
0
0
:
0
0
Celebrate 11 Years with Anycubic: Capture Your 3D Printing Moments.
Makeronline
2024-05-04 05:21:32
7k
678
Report

Hueforge Hybrid Print - Travel in Time - Back to the Future - Ritorno al futuro

@Natale206_4849662
Message
Follow
Recommended printing method
Description

“Roads? Where we're going, we don't need Roads!”


This is my first Hybrid Hueforge, so let me know what do you think about this project.


I Used Elegoo PLA and PLA+ from my old printer but you can use different.

 

For the Hueforge, (0mm - 1.92mm) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

For the Delorean (1.92mm - 40mm) Print at 10% infill, with a layer height of 0.2 mm, (but less is better) with 3 wall loops, 3 top and bottom surfaces.


- For change parameters of Delorean, select the object and using “layer height modifier”



- Change Parameters Here



NO Support required

 

Swap Instructions:

Start with Black

At layer #11 (0.96mm) swap to Ice Blue

At layer #19 (1.6mm) swap to Jade White.

At layer #23 (1.92mm) swap to Silver for the rest.

Tags
Backtothefuture
Back to the future
BTTF
Ritorno al futuro
Delorean
Ritornoalfuturo
DMC12
License