Hueforge Will Robot

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.1mm

 The Model is 150x135.46mm in size

 You may print at higher layer heights below the Min Depth of 0.5mm

 The Max Depth is 2mm and the Actual Depth is 2mm

Filaments Used:

PETG JAYO Black Transmission Distance: 0.3

PLA BambuLab Basic Jade White Transmission Distance: 5

PLA Overture Matte Red Transmission Distance: 2.5

This print uses 3 unique filaments

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:

Start with Black

At layer #7 (0.58mm) swap to Jade White

At layer #14 (1.14mm) swap to Black

At layer #15 (1.22mm) swap to Red for the rest.