2024-10-31 07:02:12
412
24
Hueforge Winnie the Pooh
@Quini_5681569
Donate
Message
Follow
Recommended printing method
Add
Hueforge Winnie the Pooh
Kobra 3
Kobra 2
、
Kobra S1
、
Kobra 4
、
Kobra X
、
Kobra 3 V2
、
Kobra 3 Max
、
Kobra 2 Max
、
Kobra 2 Pro
、
Kobra 2 Neo
、
Kobra 2 Plus
/ Plates:1
/ 3h12m
5
Share
Description
Project: Winnie the pooh.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x125mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Brown Transmission Distance: 2
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO White Transmission Distance: 6
PLA BambuLab Basic Orange Transmission Distance: 5
This print uses 4 unique filaments
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Brown
At layer #5 (0.48mm) swap to Black
At layer #7 (0.64mm) swap to White
At layer #24 (2mm) swap to Orange for the rest.
Tags
License
